[0:00]Which of the following is NOT a type of conveyor commonly used in material handling? Which of the following is a recommended practice for reducing the risk of injuries during manual material handling?
[0:57]The Maharashtra Factories Rules, 1963, Chapter-IV (Safety), Section 66 says that notwithstanding the fact that workers are engaged in the regular manual transport of loads within the permissible limits, they should be subject to medical examination prior to regular assignment and periodical examination at an interval of months, if the assignment of such jobs, exceeds more than that interval. What is the purpose of using stretch wrappers in material handling operations? What is the purpose of using shrink wrap machines in material handling operations? What is the purpose of using mechanical aids such as dollies or carts for manual material handling? What is the primary purpose of proper manual material handling techniques? Untitled What is the purpose of labelling and signage in storage areas?
[3:42]What is the purpose of using mezzanine floors in material handling facilities? One of the Safety precautions in operation of forklift trucks is to avoid front collision of two forklifts coming in opposite direction. What is the purpose of using proper shelving and storage equipment in warehouses? What is the purpose of using drum handling equipment in material handling operations?
[5:09]What is the purpose of using overhead cranes in material handling? What is the primary purpose of using forklift trucks in material handling? What is the purpose of using vacuum lifters in material handling?
[6:18]What is the purpose of conducting training sessions on manual material handling for employees? What is the purpose of conducting ergonomic assessments in manual material handling tasks? What is the purpose of conducting risk assessments for manual material handling tasks? What is the purpose of using hand trucks or dollies for manual material handling? Safe Use of Accessories for Manual Handling : In case of hooks, there is a danger of glancing off hard objects. What care should be taken?
[8:33]What is the purpose of using carton flow racks in material handling? What is the purpose of using automated storage and retrieval systems (AS/RS) in material handling? What is the purpose of using palletizers in material handling operations?
[26:06]Which of the following is NOT a common type of automated guided vehicle (AGV) used in material handling?
[26:32]Section 29(1) of The Factories Act, 1948 requires that lifting machines and tackles shall be thoroughly examined by at least once in every period of twelve months, or at such intervals as The Chief Inspector may specify in writing ; and a register shall be kept containing the prescribed particulars (Form No. 11) of every such examination. Responsibilities of are 1. To calculate the SWL where it is not available. 2. All hoists, lifts, lifting machines and tackles shall be thoroughly examined and tested. 3. Different types of load tests including deflection test of an overhead travelling crane shall be carried out and certified. Which of the following is NOT a common type of storage container used in material handling?
[28:56]Safe Use of Accessories for Manual Handling: In case of hand trolley which has mostly 3 to 4 wheels, the safe use tips are.
[29:17]Which of the following is NOT a recommended technique for lifting heavy objects manually? Which type of conveyor system is commonly used for transporting bulk materials over long distances? One of the safety precautions in operation of forklift trucks is that loaded or empty forks should be carried Say true or false: 1. Hoists and lifts are not included in the lifting machines. 2. Every hoist and lift shall be examined by a competent person at least once in six months. 3. Every hoist or lift shall have the safe working load (SWL) plainly marked on it and no load greater than such load should be carried on it. 4. The cage of every hoist or lift used for carrying persons should be fitted with a gate on each side.
[31:04]One of the safety features of conveyors is that conveyors shall be provided at loading and unloading stations and at other convenient places with devices (pull wire) for stopping the conveyor in emergency. A pull wire at intervals of should be provided. For recognition as competent person by the Chief Inspector, years experience is required after to test and certify hoists and lifts.
[32:14]The Maharashtra Factories Rules, 1963, Chapter-IV (Safety), Section 66 says that no adult male, unaided by another person, or mechanical aid, be required or allowed to lift, put down, carry or move any load of material, article, tools or appliance exceeding the maximum limit of kilograms. What is the maximum weight that should be lifted manually without mechanical assistance, according to OSHA guidelines?
[33:14]Safety in Storage and Handling of Materials: In case of Long Objects : A pile of lumber (bamboo, timber) should not be more than feet high. Tie pieces are needed not only to stabilize the pile but also to provide air circulation. These pieces should not extend much into gangways. Safety in Storage and Handling of Materials: In case of Pipe and Bar Stock: We should consider strength of the floor. Pile in layers with strips of wood or iron between layers. Strips should have block at one end or one end turned up. Bar steel stock would be stored in racks inclining towards the back to prevent rolling. The stack height should be limited to . Safety in Storage and Handling of Materials: In case of metal sheets and plates: If the sheets are in bundles and of fairly standard size, they can be safely stacked up to height with buttons between each bundle. Safety in Stacking and Un-stacking at Walls : Generally walls are not retaining walls. Therefore load should not be stacked against walls or leaning to wall. A clearance of from wall facilitates inspection of stacks and avoids stacks touching the walls. Safety in Storage and Handling of Materials: In case of Gas Cylinders: Say true or false: 1.Cylinders may be rolled on the bottom edge but never dragged. 2. Carry cylinder in a cradle or in a suitable type of carrying device. 3. Do not permit them to strike each other violently. Tie vertical cylinder by chain. 4. While returning empty cylinders or when not in use, do not close the valve and do not replace valve protection cap.
