[1:02]Ladies and gentlemen, welcome back to another tech talk. And today we are going over the Drive HD 1-8 LPVO. This LPVO is a second focal plane scope with the 24 mm front objective and built on a 30 mm tube. The scope is going to come in either our pH4 or our G4 radicals, both are illuminated. The Drive HD 1-8 has capped windshield and capped elevation with 90 MOA of total travel. It's done in 1/4 MOA increments with 24 MOA in full rev for each dial. This features a push button illumination with five different settings. On the G4, you're going to get a little illuminated cross here and on the PH4 model, only the center dot will be illuminated. The illumination is activated just by pressing the button and to power it off on the setting that you left it on, just hold down the button and then when you power it on next, it'll be on whatever illumination setting you had it on. The drive HD 18 LPO is built on a 30 mm main tube from 775 T6 aluminum, so ultra durable. It comes with flush fit aluminum scope caps. I love these because when you pop them up, they lay flash against the scope instead of standing up for snagging on brush or anything like that. One of my absolute favorite parts about this LPVO is the wide field of view on min or max power. At one power to 100 yards, this thing has a 125 ft of horizontal field of view, which beats out. I'm not going to throw on any names, but a lot of our competitors out there. So you get a nice wide, true one power that's very effective for quick target acquisition, popping back and forth, allowing you to be aware of your surroundings with your peripheral. vision.
[2:37]Out of the box, you're going to get a few things. Standard warranty and information card, Neoprene scope covers. You've got this little packet here and that's going to include things like couple stickers we throw in there for you guys. You're going to have a chart depending on your specific rectangle that breaks it down. These are also available online. You're going to get a nice zero deck lens cloth, manual throw lever, which you can decide run with it. I love to run my LPOs with throw lever. And then you're going to get this little tool and you might look at it and be like, what do I do with that? Well, it actually is a tool and it's got markings on it to tell you exactly what you need to use it for such as it can be used for adjusting the turret, the optical lens cover or the objective lens cover. And I'll show you how that's done. So you're going to take this tool and it's actually going to fit perfectly inside those notches and you can use it to get this started to unscrew the lens cap on either side should you choose. If I want to go to the front, I just use the side for objective lens and the same thing, it's going to fit right inside those two little notches. I just twist and she starts coming off. For the turts, the same thing. You're going to use this little rounded edge for the turts. It's going to fit right in there. And that'll allow you to adjust your turts to reset them to zero. Obviously, you can use a flat head or any kind of tool that fits in here. But it's just a nice little thing we throw in there. There you can throw this into a range bag, you can attach it to a key ring. It doesn't really matter. It's just a use little tool that we throw in there for you guys to know extra cost. This is one of my favorite scopes we offer and it comes at an unbeatable price. So if you guys want to see this or anything else we're offering, make sure you like the video, comment, subscribe. Go check out Zerotechtics.com for more information and we'll see you guys next time in the next one.
