[0:20]Hello community. Today we are going to extract NMT from the hospital and get it in. to one of these little vape cartridges so that we can have reliable consistent dosing every single time. So this is exactly what we're going to try to accomplish today. We're going to fill up this little red guy. So the very first thing we're going to need is a flask. I ordered this online 1000 leader, bronco flask. Everything here I've ordered legally online, everything is lab grade. I want to do this so it's as absolute safe as possible. Lab grade won't shatter uh when it's exposed to heat. Although the tech we're going to be doing today is a completely room temperature tech. So it takes all of the heat out of it. Um, at least it takes all of the heat out of the extraction process which is where we're going to be using the chemicals. So because we're going to be using chemicals today, the very first thing we're going to do is put on our safety goggles. In case we get any burps, which we want because we're not using heat, but for safety. And we're going to put on our gloves because we're going to be handling sodium hydroxide and we don't want to get any on our hands. So, once we have our wonderful flak. I love this shape because it's easy to stir. We open it up. We get 750 ml of distilled water and we pour it in. The reason that we're using distilled water is because at the end of this process we're going to be extracting our DMT and we don't want any trace elements or minerals in the DMT. We just want DMT. So, some people do this with tap water and argue that there's nothing in there that's going to harm us. And that may very well be the case, but the still water is not hard to get. So, now that we have 750 ml of distilled water in our flask. Our next move is going to be getting our grams here and starting to make our acid solution That's going to eat our bark. We take our scale. We turn it on. I use a stain in the steel metal cup for this. Put it on there empty. reset the scale. I turn on my air circulation. Normally when I'm doing this, I've got a huge fan on so that all of the air is rushing by me. Some people do it in a kitchen on a stove so that the uh exhaust fan is running. do it outside, just do it some place where you can maintain a good environment and good air flow. Um, normally I have a huge fan on but because of you guys and I want you to hear me, I don't have that today. So 100 grams of sodium hydroxide. We're going to carefully measure that out. This will go a tiny bit faster than it'll go to you at home because I've been doing it out.
[4:02]So now that we have our 100 grams in it out. You wouldn't turn off your fan, but I will again just so you can hear me. We're going to slowly add it to our 750 ml of distilled water. You want to break this up into you know, four or five little allotments. So only at a time you of sodium time. And as soon as you've added the sodium, start agitating it. You want to keep those crystals moving. So that they don't sit and stick to the glass and cause weed spots.
[4:56]Take a look at this stirring motion you're on doing. I'm making a vortex inside. This suring motion is really the only suring motion I'm going to be doing this entire tech. I create a little vortex inside so that I don't make bubbles and I get a really good mix. Once you get your muscles into the sodium hydroxide, if you create too many bubbles, makes it really hard to extract the DMT because you have this big motion layer at the end. in the base layer which is what we're going to be creating right now. That has everything. And the nap the layer on top, which is going to just have the DMT. So once your crystals are dissolved, you're going to add a little more line. Like I said, you're going to be adding the slide in two or three allotments. As soon as the lie is in, You're going to keep the water moving. Using that circular motion. I talked about before. clockwise, counterclockwise. The nice thing about this flash is that you can do a really vigorous spin and not get anything splashing up near the top. That helps to keep the top clean and it helps to keep the base solution and everything. off the cup. Ideally, you never want anything touching plastic or you don't want anything touching anything about the glass and the sameless steel. So we keep the water moving, keep it agitating for the video purposes. This is going to probably be our longest part. Once the crystals are mostly dissolved, water can still be a little cloudy, but the crystals, all the big pieces should be dissolved because again, we don't want those stick into the glass. keep adding the sodium hydroxide. When you do this at home, you're really going to want to split that into four allotments. I only split it into three there because I'm being a little bit unconscious for this video. But as long as you keep it moving as you see, that's really the key here.
[7:40]You just don't want any of the crystals sticking to the glass. Because I don't want any crystals around the top and I want to easy pour. I've just created this little funnel here out of paper. It's single use because we get sodium on it. So once it's done, they crimp it up. And then . Okay.
[8:10]So, you can see, hopefully that our solution that we keep agitating is slowly going from cloudy to clear. And so you're going to want this to go from cloudy to clear and look just like water. If you touch the bottle right now, you're going to feel it's quite warm. That's the sodium hydroxide and the water, the chemical reaction. That's what's going to be eating the miso husk is that acid. But we want to do this whole tek at room temperature because what I really want here is really nice clean spice. I don't want to get any of theters or any of the plant fats with the DMT, I just want pure DMT. So now I can see I've got no crystals in this water at all. It is a little foggy. It is a little warm, but I've got no crystals at all. I'm going to set it down. Put the cap on loosely so that vapor can still escape. Actually, I can see a few crystals up here. So I'm going to put the cap on a little tighter, a little snug and I'm going to give it a good switch. Get those last remaining crystals. Loosening half up. And I'm going to let this now mellow until it comes to room temperature. That's going to take four to six hours. So I'm going to take this away and I'm going to come back with one that has come to room temperature already so that we can move on to this tag. Okay. So once your sodium hydroxide and water has come to room temperature, it's time to add the most of the saline soup park. So we're going to grab our scale one more time. Our second cup that's made for Roost Park. We're going to tear our scale.
[10:09]Reset it to zero. We're going to carefully measure out. 100 grams of Mobahostilas Roost Park. Oh, smoky smoky. Oh, look at that. 100 grams exactly. almost like somebody pre-measured it. You're going to take a funnel. I have this really funky funnel and I got on online like everything else. And you're going to add it to your 750 ml of distilled water. sodium hydroxide mix. Sodium hydroxide is really just 100% pure lye. If you go online, you can see a lot of people just getting 100% pure lye from the hardware store. My problem with that, although it works is if you dump all those crystals out, you'll see some dark little crystals. And those darker little crystals surely aren't 100% lie. So, I've got a funny feeling that the manufacturers designed that sodium hydroxide or that lie absolutely not for this type of purpose. So, go online, order lab quality stuff. You put your in there. 100 grams of most of the. And you start spinning. You just do that circular tornado again so that you saturate all the root bark in the lie. You do this for two or three minutes. to get everything really nicely mixed up. Just back and forth as firmly as you can. After two or three minutes, the guy's shaking, or not shaking, sorry, vigor is swirling. You don't want to create air bubbles. So a vigor is swirling, you're going to put it down and you're going to let everything rest for 10 to 15 minutes. After 10 to 15 minutes, you're going to come and you're going to open it up and take a peek inside. And you're going to notice that there might be little clumps. little clumps of rock bark. So you just take a metal spoon, stay in the steel. or wood with no dyes because remember now we have a chemical process happening there. So, a wooden spoon, chop stick, middle spoon, break up as best as you can. All of the clumps. And give it another really good spin. You want to do this again for two to three minutes.
[13:28]What we're trying to do is we're trying to coat as much of the root bark as possible with that base solution. And that's going to really that's what's going to be breaking down all of the root bark cells and releasing the DMT. Because the root bark needs to really dissolve in this mixture, it really helps to source root root to source root bark that's been really finely powered. Um this is powdered almost like a um powder sugar. Some stuff comes more like a uh finely chopped meringue wheat or something. Um, you know, finely chopped. That's okay. takes, you know, I would tend to do this. process the mixing a little bit longer because it's going to take longer for the line to eat all that stuff up. So you do your two-three minute mixing, you set it down, you let it rest for 10 or 15 minutes, you come back and you do two to three minute mixing again. You want to keep doing this kind of six to eight times at an absolute minimum if you've got something that's really finely powdered. If you've got something that's not as finely powdered, then you probably want to do this for a couple hours longer. Um, you know, give it a good stir, let it rest for 20 30 minutes. Give it a good stir, let it rest. Once you've once you're satisfied, you look in it, that it all looks like a black base, very consistent soup. It's time to add your na. Everything to this point has just been at room temperature.
[15:28]Your is going to pull out the DMT. Same as all my products here. Lab grade, lab grade, lab grade.
[15:43]You can get lab again in the hardware store. Again, I understand it works. It's says that it's 100% pure, just like the lie says it's 100% pure lie. Yes, they you know, if you're buying camping stone, camping stove, a lot of the times, it's going to have a rest inhibitor or something. it. So when you do a drip test, it's going to leave something behind. That's something it leaves behind, you're going to end up smoking or sorry, vaporizing and you don't want to do that. So we do a drip test every time we get new naptha. And that's simply taking a drop of drop of the naptha, putting it on the slide and leaving it for 15 20 minutes to totally evaporate. I'm going to speed that process up here for us. When you come back in 15 20 minutes, you want to really examine your slide and make sure that it's clean. That all of the nap that truly did evaporate off the slide. Once you're satisfied, that your nap is clean and you satisfied that your mixture has been adequately stirred. which of course this one hasnt. So this is a little bit of aization because this one hasn't sat for long enough, but assuming it had, we're going to take 150 ml of VM and Pnaptha, which I ordered online, lab quality and we're going to add it to our flask. Once you add it to the flask, you're going to have two distinct layers going on. You're going to have I hope you can see this. The base layer um that's black and you're going to have your na layer which is clear. You're going to do the same mixing that we've been doing from the very start. You're going to have the neck. Make sure the caps on snip but not too tight. And you're going to start those circular motions. You're going to start doing those circular motions really nice and fast, clockwise and counterclockwise creating a tornado so that the two layers come together into one thick black layer again. You're going to set it down to rest for two to four hours. In two to four hours you're going to come back and you're going to know that it's separated into two layers. The nap is pulled out. There is going to be a bunch of DMT in there, but we're still going to repeat that process three more times. We're going to pick up the container and we're going to start our our our flask. We're going to start our circular tortilla and we're going to do this for two minutes. Mixing that naptha that's now turning yellow back into our base so that we have one solid layer. We're going to set it down to rest for two to four hours. We're going to come back and we're going to notice our layers are separated. Looking good, looking good. We're going to grab our flask. We're going to start to do our tornado again to two or three minutes. Get it all mixed up. So that it's consistent. Set it down. Let it separate. Come on back, pick it up, swirl it around, clockwise and counterclockwise. And set it down one last time. And let it separate. Every time you let it separate, you're going to give it anywhere between two and four hours. It doesn't matter if you let it go longer. You want to do this process at least four times. It doesn't matter if you do it more times. Once you've done it at least four times, you're going to come back again. You're going to notice you have your two separate layers. You're going to get your pyrestick with your lid and open it up. You're going to get your 5 mm Sorry, 5 ml pipet and you're going to very carefully suck the top layer of nafta from the flask making very cautious not to take any of the base. This is really the most important part. Everything in the base is things you don't want in your body and everything in the nafta we can freeze participate out and we will be left with pure white DMT. Because it's so important not to get any of the base layer. I'm not very greedy on this first pull. At the very end, I'm going to leave a layer of an after behind so that I know on top top of the base so that I know I'm not getting any flex of base into my pyrex dish. If I do accidentally get a tiny little flack into my pyrex dish, I'm going to grab a paper towel, a little piece of a paper towel. Like in here, it's going to sink to the bottom and it's sticky. I'm going to move the nap out of the way and I'm going to wipe a little bit of base up and keep going even more carefully so that I know I don't get any base again.
[22:16]Once that's done, once all of your top layer ofna is in your pyrex dish. You're going to cover the dish and you're going to take it inside and put it in the freezer for 12 to 24 hours. 12 to 24 hours later you're going to go to the freezer and you're going to bring your dish back. And open it up. And you're going to notice that it is full of white crystals on the bottom with a layer of naptha on top.
[23:04]You're going to carefully drain the napha back into its container. All of the crystals should stick to your pyrex dish. If you find that they don't stick to the pyrex dish, you can always take a coffee filter and pour this all through a coffee filter and dry out the coffee filter and you'll be left with the spice. But In my experience, it always sticks. Once you've poured all of your naptha back into your container, set it aside and let it come to room temperature so that you can use it for your second extraction on the same stuff so that we can make sure we get everything. Now that you have your wet crystals, we need to let them dry. That's going to take another. 4 to 6 hours put down the paper towel. Replace the dish on an angle where the nap can drain off and onto the paper towel. We add some circulation. And we give it two to four hours to completely dry. In two to four hours we come back.
[24:26]And we notice the dish is completely dry. And the crystals are stuck and look beautiful and white.
[24:42]I hope you can see this well. And these are already very usable crystals. If you have an Emesh or the machine, but the problem with the Emesh and the machine and and the oil all those things is although they absolutely work, I love the image. You have to either you have to be experienced first of all, and it's very hard to get a reliable dose quickly and easily.
[25:21]So you can see with this with this cold room temperature attack we're left with some very clean spice. We've probably got anywhere between 1 and 2 grams, which is a lot of DMT um or more than enough DMT to make one of these guys.
[25:51]So now that we have our DMT or NNDM powder. Uh we are going to move to our milligram scale.
[26:04]carefully wave. 1 g. Okay, now that we've measured out 1 g of DMT, it's time to melt it and add it to our vape cart.
[26:45]So to melt it, we take a little sauce pan. And we add some just boiled hot water.
[27:03]some hot water. Take a container. That's made for hot water. And you pour the DMT in. As soon as the DMT goes into the water, it's going to immediately or into the dry flask in the hot water.
[27:30]It's immediately going to start to melt. So we put 1 g of DMT powder into the beaker.
[27:44]We're going to make a cart that's 3 to 1. So 3 times DMT, 1 time PG. So if we're going to use 1 g of DMT, we're going to use 0.3333333 ml of PG. So we simply pull up 0.33 of a millimeter. put it into our DMT mix. And we're going to let that mellow in the water in the water for 5 or 10 minutes.
[28:34]And then we're going to get it all combined up in there. And it's going to start looking like a melted butter. After about 5 or 10 minutes of letting your DMT powder and your PG mellow together, they're going to have a consistency of melted, it's going to have the consistency of like a melted butter. Beautiful little vape juice.
[29:14]And from there, we're simply going to take our 1 ml cartridge and open it up. Get a little bottle ready. for any access.
[29:36]We're going to suck up all the DMT juice. into our syringe and very carefully slowly we're going to inject it into our cartridge. until it's full right to the top.
[30:11]Once it's full of the top, you close the cage. I'll take care of that in a second.
[30:30]You before you even move it, you find a label and you label it. appropriately.
[30:49]And there you go. And then you're absolutely ready to go. I always try to find batteries that have a voltage or a temperature setting on the bottom.
[31:18]And I started the lowest possible setting and work my way up from there because what you really don't want to do is you don't want to burn the DMT inside. So, I start from the lowest setting I turn on the pen. I double click it to heat it up. Once I can hear it, I know it's warm.
[31:43]I put it to my lips. I push the button and I do a slow 10 second inhale, filling my lungs about 80%. And then I hold for a moment and I steady myself. And then I draw in an additional 20% of fresh air, filling my lungs up. I hold again and I release. And I repeat that three times and with a three to one pen, that should send you away. Make a wide make a wide range of pens. Uh two to one, a three to one, maybe a one to one to start with and start low and slowly figure out what your tolerance is. The beautiful thing about these cartridges is once you figure out where your tolerance is, you can get consistent doses absolutely every time.
[32:44]Couple tips is off to the side, some things that you don't see happening is I've always got a fresh water source. So that God forbid, I got get a spill or something breaks. I have lots of fresh water that I can miss it with. I don't normally just let my base sit um because I'm normally doing them outside and so I'm not always at room temperature. I use an Insta pot um little attachment, a bowl with some water in it and this little Insta pot to keep the temperature at 80 degrees for the entire time. I pull it out of the water, I do my spins. That's one of my best uh best tips. My other tip is just be patient and have fun and make sure you get good quality ingredients.
[33:47]None of the ingredients here are with any other ingredients. Good luck. Thanks for watching.
