Live Sales Training with Weston Walker!

[0:00]Hello, this is Joe from the Cisco TAC. Today I'm going to demonstrate how to enable web UI and https on the Cisco Ice SNS 3600 and 3700 series appliances. To log in to the Cisco SNS appliance via SSH, you must use a console connection. The management port does not allow SSH access by default. For the purpose of this demonstration, I'm using the 3615 running Ice version 2.7. Once you have successfully logged in to your appliance, the command to enable web UI is shown here. Next, the appliance will prompt you to configure https. The appliance will ask you to enter a key file and a certificate file. These files are located on the appliance itself. The path will be the same for both files as shown here. Next, the appliance will confirm your configuration, then prompt you to enable it. And finally, the appliance will show that the web UI is successfully enabled. Once the web UI is successfully enabled, you can then access the appliance via the management IP and a web browser. And there you have it. You've successfully enabled web UI and https on the Cisco Ice SNS 3600 and 3700 series appliances. I hope this video was helpful. Thank you for your time.