[0:00]Hi, we bought a 3M water filter, which is an AP Complete, a complete DIY kit. We must remove the anti-counterfeit label first. Inside, there's a filter element and a filter head. In addition, there's a package of accessories, including a diverter, a 3M mounting plate, and a 90-degree adapter. Don't worry if you don't know how to install it. We have an instruction manual, a warranty card, and all the parts and accessories are covered by a three-year warranty. The filter element is a consumable, so it's not covered by the warranty. Once we've checked all the parts and accessories and confirmed they are correct, we can start the installation process. First, we need to clean the wall and attach the mounting plate. After it's secured, we'll attach the filter head. Once the filter head is attached, the next step is to remove the aerator from the faucet. All faucets will have an aerator. After removing it, you'll see it's an external thread, so we'll need to use our adapter. If it's an internal thread, you can directly install our diverter. Remember to install the rubber washer, otherwise, it will leak. Pay attention to this situation. We can directly install the adapter and then install the diverter. Tighten it to prevent leaks. After installing the adapter, we need to connect the hoses. First, there's an arrow indicating the inlet, which is the red dot, so we'll plug it in directly. Next, there's an outlet, which we'll also plug in directly. After connecting all the hoses, you might find that some hoses are too long. You just need to press the blue plastic clip, pull it out, and you can cut it. If you don't press it firmly, trying to pull it out forcefully will break it, or even make it impossible to pull it out. After we've done all the connections, we'll test the water. We'll check if there's any leakage. If there isn't, we can install the filter element. The Complete filter element can be directly installed.
[2:26]After this is installed and the hoses are connected, we can test the filtered water. Turn it on. Okay, now all the hoses are connected, and the filter element is also installed. The filtered water coming out is normal. Remember, it's safe to drink directly. If you need to wash your hands or do other things, use unfiltered water. But the filtered water coming out now is safe to drink directly. This is a very simple installation process. After installing the 3M water filter, it can be drunk directly. It's very simple to install.
